2026
Version: 10.6.0
Get your 3EYE HUD connected and configured in minutes.
Link3EYE is not yet available on Google Play. Follow these steps to install it manually:
NOTICE Grant all Bluetooth and Location permissions when prompted.
Open https://link.3eye.blue in your browser.
Use the app directly in your browser, or install it on your computer.
To install, click the Install icon on the right side of your browser’s address bar and follow the instructions.
NOTICE Grant all Bluetooth and Location permissions when prompted.
Power on your 3EYE HUD and navigate to the Configuration Mode to enable Bluetooth (CF → BL). Bluetooth is enabled by default. If (BL) is green, Bluetooth is enabled. If (BL) is red, Bluetooth is disabled and must be enabled.
Inside configuration mode find your device name (CF → AD) and password (CF → PS).
Open the app Link3EYE and tap Connect from the Home Screen.
Tap SCAN — the app searches for nearby 3EYE devices for ~2 s.
Select your device from the “Selected 3EYE device” dropdown.
Tap CONNECT.
Enter the device password when prompted and tap OK.
Once connected, the dropdown and the Home Screen caption turns blue.
NOTICE Enable Autoconnect to skip scanning next time — the app will reconnect to your last device automatically.
Navigate back to the Home Screen. All settings are sent to the device instantly — no save button needed.
| Setting | What to Set |
|---|---|
| Unit System | METRIC (m, m/s) or IMPERIAL (ft, ft/s) |
| Display Type | HEAD-UP (visor) or HEAD-DOWN (direct view) |
| Font Type | EFFICIENT (saves battery) or STANDARD (clearer) |
| Intensity | Drag sliders for min/max intensity |
| Night Mode | Toggle on for night jumps |
Works only when the device is operating in AltVar (AV) mode. - Tap RESET at the airfield to calibrate ground level. - set dropzone elevation if it is different then the place where you are turned on 3EYE.
Without a device connected, use the Database dropdown to browse previously synced events.
Need more detail? See the full Link3EYE User Manual.
Homepage: https://3eye.blue